Custom Trisuits

Custom trisuits are trisuits made in your squad, club or event's colours and logo — fully sublimated, built on the same trisuits DTR sells at retail, with a triathlon-specific chamois, a quick-drying, chlorine-resistant build and an aero race fit. A trisuit is the hardest piece of custom kit to get right, because it has to work in the water, on the bike and on the run without a single compromise — which is exactly why it should be a real race suit rather than a printed one-off. From five pieces per design, with free design support and a typical six-to-eight-week turnaround. This guide covers what you can order and what actually matters in a custom trisuit.

Why a trisuit is different from custom cycling kit

A jersey has one job. A trisuit has three, and every design decision has to survive all of them. It goes under a wetsuit and has to come out of the water without holding weight; it has to sit snug and aero on the bike; and it has to run without the chamois turning into a wet, chafing nappy. That's why a custom trisuit is a race suit first and a branded garment second.

DTR's custom trisuits carry the tri-specific chamois from the retail range — thin enough to run in, structured enough to support the bike leg — plus a chlorine-resistant outer that survives pool sessions and a quick-drying fabric that sheds water out of the swim. Custom changes the design, not the standard.

What you can order

• Sleeved (aero) trisuits — the racing default, with fitted sleeves that smooth airflow over the shoulders and give sun protection on long, exposed courses.
• Sleeveless trisuits — cooler in heat, easier to pull a wetsuit over, with free shoulder movement for the swim.
• One-piece and two-piece — a one-piece for aero and simplicity; a two-piece for long-distance flexibility, nutrition access and comfort.
• Men's and women's cuts — different chamois geometry and cut, not a resized men's suit.
• Matched training kit — jerseys, bibs and layers in the same design, so the squad is recognisable in training as well as on race day.

If you're kitting out a whole squad rather than choosing a product, our custom triathlon kit for squads page covers how a squad order works end to end.

Designing a trisuit

A trisuit is the most photographed piece a triathlete owns — finish-line shots, bike splits, podiums — so the design earns its keep.

Chest and upper back are the highest-value sponsor surfaces, visible in every finish photo and every on-bike shot from the front. The thigh panel works well for secondary marks, and the rear (on a two-piece, the top's back panel) is what everyone behind you sees on the bike. Keep it high-contrast: the suit is seen in motion, wet, and at distance.

One practical note: light colours on a trisuit go semi-transparent when wet. Plan the front and seat panels accordingly — this is a common and avoidable mistake on first custom orders.

Sleeved or sleeveless: choose per squad

Neither is better. Sleeved suits are faster and give more sun protection, which is why they've become the racing default at 70.3 and Ironman. Sleeveless suits are cooler, easier under a wetsuit and give freer shoulder movement, which suits hot races and swim-focused athletes. Plenty of squads order both in the same design and let athletes choose — the design stays consistent either way.

How the process works

Share a brief — colours, logo files, sponsor marks, and a rough idea. DTR's team builds two to three design routes on real trisuit templates, you review, and most orders are approved within a couple of rounds. Nothing goes to production until you sign off, and the approved design is saved on file, so next season's intake gets the same suit with no redesign.

Production runs in the same factory as the retail line, invoicing is on agreed terms, and shipping goes worldwide — to one address or split across athletes.

Minimum order, turnaround and pricing

The minimum is five pieces per design — five of the same trisuit design across a mix of sizes meets it, which keeps custom realistic for a small squad. Turnaround is typically six to eight weeks from approved design to delivery, though it varies by season; confirm the current lead time when you enquire, and work back from your A-race. Pricing is quote-based, built around the styles, quantities and finish you choose.

FAQ

What is a custom trisuit? A trisuit made in your own colours and logo, fully sublimated so the design is dyed into the fabric. At DTR it's built on the retail trisuits, with a tri-specific chamois, chlorine-resistant build and aero race fit — a real race suit, not a printed one.

Does a custom trisuit use the same chamois as your retail range? Yes. The same triathlon-specific chamois — thin and quick-drying enough to run in, structured enough to support the bike leg. Custom changes the design, not the standard.

Can we order sleeved and sleeveless in the same design? Yes. Many squads do exactly that and let athletes pick, since neither is better — sleeved is faster and gives more sun protection, sleeveless is cooler and easier under a wetsuit.

Will a light-coloured trisuit go see-through when wet? Light colours can go semi-transparent when wet, so plan the front and seat panels with that in mind. It's the most common mistake on a first custom trisuit order, and it's easy to design around.

What's the minimum order for custom trisuits? Five pieces per design across a mix of sizes, which keeps custom workable for a small squad rather than only large clubs.

The bottom line

A custom trisuit has to work across the swim, the bike and the run — so it needs to be a real race suit that happens to be in your colours, not a branded garment that struggles on race day. DTR's custom trisuits carry the tri-specific chamois, chlorine-resistant build and aero fit of the retail range, sleeved or sleeveless, men's and women's, from five pieces per design. Request a custom quote and DTR will take it from your brief.

—

DTR — performance cycling and triathlon apparel, designed and developed in Ukraine.